Featured

  • Hot Selling for Carbon Steel Heat Exchanger Tubes - ASTM A179 U Bend Heat Exchangers Tube  – Datang

    Hot Selling for Carbon Steel Heat Exchanger Tubes - ASTM A179 U Bend Heat Exchangers Tube – Datang

    ● ASTM A179/ ASME SA179; ● ASTM A213/ ASME SA 213, T11, T22, T22, T5; ● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410; ● ASTM B111, C44300, C68700, C70600, C71500; ● ASTM B338, GR.1, GR.2. ● Monel Alloys. ● Nickel Alloys. ● U Bend Dimension capability. ● Tube OD.: 12.7mm-38.1mm. ● Tube Thickness: 1.25mm-6mm. ● Bending Radius: Min.1.5 x OD/ Max. 1250mm. ● U tube Straight “leg” Length: Max. 12500mm. ● Straight tube before U bending: Max. 27000mm. U Bend Tu...
  • Factory Cheap Hot Twisted Tube Heat Exchanger - L, LL, KL Finned Tube(Wound Finned Tubes)  – Datang

    Factory Cheap Hot Twisted Tube Heat Exchanger - L, LL, KL Finned Tube(Wound Finned Tubes) – Datang

    L finned tubes, LL (Double L) finned tubes, KL finned tubes (knurled fin tubes) (with aluminum fins) Fins: Aluminum ASTM B209 Al 1060; ASTM B209 Al 1100, 1050A. Fields of application ● the petroleum, chemical and petrochemical process industries ● natural gas treatment ● the steel industry: blast furnace and converter systems ● power generation ● air conditioning (Freon, ammonia, propane) ● incineration of household refuse ● compressor coolers, etc. L-foot tension wound finned tubes consist o...
  • Reasonable price for Tube In Tube Condenser - G Type Embedded Spiral Finned Tube  – Datang

    Reasonable price for Tube In Tube Condenser - G Type Embedded Spiral Finned Tube – Datang

    ● Bare tube general material: Copper, Alloy, Carbon Steel, Stainless Steel ● Bare tube OD: 16-63mm ● Fin general material: Aluminum ● Fin pitch: 2.1-5.0mm ● Fin height: <17mm ● Fin thickness: ~0.4mm G type embedded spiral finned tube is processed from a certain width in the steel pipe and spiral groove depth, then inlays the ribbon on the steel pipe by the equipment. In winding process, as the pre-tightening force to a certain extent so the strip will be firmly in the spiral groo...
  • Fast delivery Finned Copper Pipe - T-Type High Efficient Heat Exchange Finned Tube  – Datang

    Fast delivery Finned Copper Pipe - T-Type High Efficient Heat Exchange Finned Tube – Datang

    ● Bare tube general material: Carbon Steel, Copper, Stainless Steel, Alloy ● Bare tube OD: 10-38mm ● Fin pitch: 0.6-2mm ● Fin height: <1.6mm ● Fin thickness: ~0.3mm T fin tube is a kind of high efficient heat exchange tube that is made by rolling processing and molding of the light pipe. Its structure characteristic is forming a series of spiral ring T tunnel on the outside the pipe surface. The medium outside the pipe forms a series of bubbles in the tunnel nuclear when heated. And becaus...
  • Excellent quality Fin Tubes For Heat Exchangers - Elliptical Fin Tube With Rectangular Fins Oval Tube  – Datang

    Excellent quality Fin Tubes For Heat Exchangers - Elliptical Fin Tube With Rectangular Fins Oval Tube – Datang

    ● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structure...
  • Manufacturing Companies for Fin Tube Radiation - ASTM A179 U Bend Heat Exchangers Tube  – Datang

    Manufacturing Companies for Fin Tube Radiation - ASTM A179 U Bend Heat Exchangers Tube – Datang

    ● ASTM A179/ ASME SA179; ● ASTM A213/ ASME SA 213, T11, T22, T22, T5; ● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410; ● ASTM B111, C44300, C68700, C70600, C71500; ● ASTM B338, GR.1, GR.2. ● Monel Alloys. ● Nickel Alloys. ● U Bend Dimension capability. ● Tube OD.: 12.7mm-38.1mm. ● Tube Thickness: 1.25mm-6mm. ● Bending Radius: Min.1.5 x OD/ Max. 1250mm. ● U tube Straight “leg” Length: Max. 12500mm. ● Straight tube before U bending: Max. 27000mm. U Bend Tu...
  • High reputation Finned Tube Heat Exchanger Working - Laser Welding Finned Tube For Heat Exchanger  – Datang

    High reputation Finned Tube Heat Exchanger Working - Laser Welding Finned Tube For Heat Exchanger – Datang

    ● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m  The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structur...
  • Competitive Price for Steel And Tube Aluminium - H Type Finned Tube Rectangular Finned Tubes  – Datang

    Competitive Price for Steel And Tube Aluminium - H Type Finned Tube Rectangular Finned Tubes – Datang

    ● H type finned tube specifications ● Tube OD: 25-73mm ● Tube Thk:  3.0-6.0mm ● Fin Thk: 1.5-4.0mm ● Fin Pitch: 9.0-30.0mm ● Fin Height: 15.0-45.0mm H finned tubes are widely used in utility boilers, industrial boilers, Marine power, tail of heat exchangers, economizers or waste incinerators for coal and oil installations etc. H-economizer two rectangular fin, similar to a square, its edge length for the fluorescent tubes of 2-fold, an expansion of the heating surface. Max. Working Temperatur...
  • One of Hottest for U Bend Tubes - L, LL, KL Finned Tube(Wound Finned Tubes)  – Datang

    One of Hottest for U Bend Tubes - L, LL, KL Finned Tube(Wound Finned Tubes) – Datang

    L finned tubes, LL (Double L) finned tubes, KL finned tubes (knurled fin tubes) (with aluminum fins) Fins: Aluminum ASTM B209 Al 1060; ASTM B209 Al 1100, 1050A. Fields of application ● the petroleum, chemical and petrochemical process industries ● natural gas treatment ● the steel industry: blast furnace and converter systems ● power generation ● air conditioning (Freon, ammonia, propane) ● incineration of household refuse ● compressor coolers, etc. L-foot tension wound finned tubes consist o...
  • Factory directly Propress Fin Tubes - L, LL, KL Finned Tube(Wound Finned Tubes)  – Datang

    Factory directly Propress Fin Tubes - L, LL, KL Finned Tube(Wound Finned Tubes) – Datang

    L finned tubes, LL (Double L) finned tubes, KL finned tubes (knurled fin tubes) (with aluminum fins) Fins: Aluminum ASTM B209 Al 1060; ASTM B209 Al 1100, 1050A. Fields of application ● the petroleum, chemical and petrochemical process industries ● natural gas treatment ● the steel industry: blast furnace and converter systems ● power generation ● air conditioning (Freon, ammonia, propane) ● incineration of household refuse ● compressor coolers, etc. L-foot tension wound finned tubes consist o...
  • 2021 Good Quality Fin Tube Type Heat Exchanger - Aluminum Copper Alloys Extruded Finned Tube  – Datang

    2021 Good Quality Fin Tube Type Heat Exchanger - Aluminum Copper Alloys Extruded Finned Tube – Datang

    Every single member from our large efficiency revenue team values customers’ wants and company communication for. We are able to do your tailored get to fulfill your own satisfactory! Our organization sets up several departments, including manufacturing department, sales department, high quality control department and sevice center, etc. Specification Faucet Type Bathroom Sink Faucets, Installation Type Centerset, Installation Holes One Hole, Number of Handles Single Handle, ...
  • OEM/ODM Manufacturer Tube And Fin Radiator - G Type Finned Tube(Embedded Finned Tube)  – Datang

    OEM/ODM Manufacturer Tube And Fin Radiator - G Type Finned Tube(Embedded Finned Tube) – Datang

    Main industries in which the ‘G’ Fin Tubes find service are Process Chemical Plants, Refineries, Gas Processing Plants, Steel Plants, Power Plants, Fertilizer Manufacturing Plants, etc. Finned Tube—-G-Type Fintube / Embedded Fintube A spiraling groove zero.2-0.3 mm (0.008-0.012 in) is plowed  into the surface of the base-tube wall such metal is just displaced, not removed. The metal fin is wound automatically into the groove beneath tension, once that the displace metal is rolled back o...
  • Wholesale Multi Tube Heat Exchanger - Laser Welding Finned Tube For Heat Exchanger  – Datang

    Wholesale Multi Tube Heat Exchanger - Laser Welding Finned Tube For Heat Exchanger – Datang

    ● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m  The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structur...
  • Factory Supply Exchanger Tube - Laser Welding Finned Tube For Heat Exchanger  – Datang

    Factory Supply Exchanger Tube - Laser Welding Finned Tube For Heat Exchanger – Datang

    ● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m  The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structur...
  • professional factory for Finned Aluminum Tubing - Laser Welding Finned Tube For Heat Exchanger  – Datang

    professional factory for Finned Aluminum Tubing - Laser Welding Finned Tube For Heat Exchanger – Datang

    ● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m  The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structur...