Products
-
HFW sprial SERRATED fin tubes apply in HEAT RECOVERY STEAM GENERATOR
● Bare tube general material: Carbon Steel, Copper, Stainless Steel, Alloy ● Bare tube OD: 10-38mm ● Fin pitch: 0.6-2mm ● Fin height: <1.6mm ● Fin thickness: ~0.3mm T fin tube is a kind of high efficient heat exchange tube that is made by rolling processing and molding of the light pipe. Its structure characteristic is forming a series of spiral ring T tunnel on the outside the pipe surface. The medium outside the pipe forms a series of bubbles in the tunnel nuclear when heated. And becaus... -
Copper Finned Tubes,Pure Copper Composite Finned Tube
● Bare tube general material: Carbon Steel, Copper, Stainless Steel, Alloy ● Bare tube OD: 10-38mm ● Fin pitch: 0.6-2mm ● Fin height: <1.6mm ● Fin thickness: ~0.3mm T fin tube is a kind of high efficient heat exchange tube that is made by rolling processing and molding of the light pipe. Its structure characteristic is forming a series of spiral ring T tunnel on the outside the pipe surface. The medium outside the pipe forms a series of bubbles in the tunnel nuclear when heated. And becaus... -
Extruded Fin (Bi-metallic Fin)
High-efficiency Extruded Finned Tube for higher temperature applications giving complete and permanent atmospheric corrosion protection of the base tube. Using over 40% more aluminium than the equivalent applied fin, the extended fin is very robust and resistant to mechanical damage, allowing the Extruded Finned Tube to be cleaned without damage using either steam or high-pressure water Extruded Finned Tube is composite with iron-aluminum or copper-aluminum tube rolling out the fin, which fe... -
Aluminum Copper Alloys Extruded Finned Tube
Extruded Finned Tube is made from mono extruded copper alloys. Fins are up to 0.400″ (10mm) high. Extruded fin tubes are formed helically out of a mono-metal tube. The result is an integrally formed finned tube with an excellent fin-to-tube uniformity providing exceptional efficiency and longevity. Whether rough service, high temperatures, or corrosive environment, extruded fin tubes are a great option for heat exchanger applications. High Finned Tubes can be annealed to a soft state for bending and coiling. This type of product is excellent for heating, refrigeration, machinery coolers, water-heaters, and boilers.
-
Sprial Welding Finned Tube(Helical Finned Tubes)
high frequency welded spiral finned tubes are generally used for petrochemical industry and mostly installed on the convection sections of fired heaters, waste heat boilers, economizers, air preheaters, and heat exchangers involving the transfer of heat from a hot fluid to a colder fluid through a tube wall.
-
L, LL, KL Finned Tube(Wound Finned Tubes)
Foot Finned Tubes are utilized into an heat exchanger, which does not exceed near 400 degrees, and used primarily in air-cooled applications (including large radiators and large compressor oil coolers).
-
Laser Welding Finned Tube For Heat Exchanger
The heat exchanger is the key equipment of the thermal system, and the laser welding finned tube is an important part of the heat exchanger. For example, the tube and fin heat exchanger is a heat exchanger structure with high technical content and complex production process.
-
H Type Finned Tube Rectangular Finned Tubes
H-economizer flash resistance welding processes used, the welding seam after the high rate of fusion, weld tensile strength, and has good thermal conductivity. H-economizer can also manufacture dual tube “double H” type fin tubes, its rigid structure, and can be applied to a longer tube row occasion.
-
G Type Finned Tube(Embedded Finned Tube)
G’ Fin Tubes or Embedded Fin Tubes are mainly used in air fin coolers and many different types of air-cooled radiators. These types of ‘G’ Fin Tubes mainly find application in areas where the temperature for heat transfer is in a slightly higher range. The Embedded Fin Tubes are mainly used in places with higher temperature and where the working atmosphere is relatively less corrosive to the base tube.
-
Studded Finned Tube Energy-Efficient Heat Exchange Component
The studs are welded to the tubes using electrical resistance welding, producing high quality welds. Studded tubes are mostly employed in preference to finned tubes in heat transfer systems in petrochemical plants, where the surface is exposed to very corrosive environment such as dirty gases or liquids. These tubes should be resistant to aggressive materials and must be cleaned frequently.
-
ASTM A179 U Bend Heat Exchangers Tube
After U bend (cold forming), heat treatment of bending portion may be required. nitrogen generating machine (to protect stainless steel tube surface during annealing). Temperature is controlled through the entire heat-treated area by fixed and portable infrared pyrometers.
-
Elliptical Fin Tube With Rectangular Fins Oval Tube
Elliptical Fin Tube|Elliptical Tube With Rectangular Fins| Hot dipped galvanized oval fin tubes.
This fin tube design utilizes an elliptical shaped tube with an efficient air foil shape to minimize airside flow resistance. These fins have improved performance characteristics compared to round tube types.
The corrosion resistance of these fins will be very high after being hot dip galvanized. These fin tubes are very compact compared to other types of fin tubes and their heat transfer efficiency is significant.